CNC Laser Cutting: Software, Format and Acceptance

Start with the part, not the machine name

CNC laser cutting is a process where a focused laser beam cuts sheet metal or tube according to a CAD file. For a buyer, the useful question isn’t “fiber or CO2?” but “which complete system will cut my drawings, in my material, at my thickness, with the controller and software I can support?” The decision sequence below keeps the purchase checkable.

Map the CNC cutting workflow before you buy

CNC laser cutting is a chain, and each link must accept the previous one. The workflow below is the sequence to verify with the seller. It is not an operating procedure; follow the machine manual for operation.

  1. Drawing: your part file in a format the seller’s CAD/CAM can import.
  2. CAD/CAM and nesting: the software that prepares the cut path and arranges parts on the sheet.
  3. Postprocessor: the translation layer that turns the CAM output into controller code.
  4. Controller: the machine control that runs the program and manages the cutting parameters.
  5. Cut sample: a physical part cut from your material on the offered configuration.
  6. Inspection: the agreed method for checking the sample against the drawing.

The BM pages name CypCut as the control system, describing CAD, CAM, and nesting functions in one platform with multi-format import. That is a catalog description. Ask the seller to confirm which software modules are licensed, which postprocessor is supplied, and which file formats are accepted for your drawings.

First, define the part: material, thickness range, largest flat size, smallest hole, and whether you need tube or profile. Second, choose the machine configuration that matches those requirements: beam source, guarding, table handling, and workpiece support. Third, confirm the controller, CAD/CAM and nesting software, postprocessor, and file formats. Fourth, agree on an acceptance part and inspection method. Fifth, request a quotation that lists software, installation, and training separately from the machine.

That order prevents a common mistake: buying a machine by label and discovering later that the controller doesn’t accept your drawings or that the nesting license is extra. The sections below follow that sequence and include blank record fields for anything the seller has not confirmed. An em dash means unconfirmed, not zero.

Controller, CAD/CAM, postprocessing, and file delivery

The controller and software are where many purchase surprises appear. A machine can be mechanically sound and still fail the workflow if the controller doesn’t accept your CAM output or if the nesting license is limited. Use the checklist below to record what the seller confirms. Leave a field blank with an em dash if it is unconfirmed.

ItemWhat to confirmSeller confirmation
Controller modelExact controller and firmware version offered—
CAD/CAM softwareName, version, and whether it is included or optional—
Nesting licenseSeats, term, and whether nesting is bundled with the controller—
PostprocessorWhich postprocessor is supplied and for which controller—
Accepted file formatsDrawing and CAM formats the system imports—
File delivery methodHow programs are transferred to the machine—
TrainingWho trains, on what software, and for how long—
DocumentationManuals, wiring diagrams, and software notes supplied—

Ask for the software list in writing. If the quotation says “CypCut control system,” ask whether the nesting module is part of that price or a separate license. If your drawings come from a specific CAD package, send one sample file and ask the seller to confirm import before you order.

Read machine types as separate choices

Machine labels mix several independent decisions. A “fiber laser” label says something about the beam source, but not about guarding, table handling, or workpiece support. Treat each label as a question to settle with the seller, not as a complete specification.

The table below lists common label pairs and the question each one should trigger. Use it as a checklist during the first conversation.

What each machine label tells a buyer
ChoiceLabels you may seeQuestion to settle
Beam sourceFiber or CO2Which source and complete machine are offered for the specified metal?
GuardingOpen or enclosedWhat guarding, access controls and extraction are included?
Table handlingSingle table or exchange tablesHow will sheets enter and finished parts leave the cutting area?
WorkpieceSheet or tube/profileDoes the machine support the geometry shown on the drawing?
Catalog format3015 or 6020What plate size or cutting area does this particular catalog specify?

For the single-table BM series, the product page describes a stable single-table design for carbon steel, stainless steel, aluminum alloy, and other metals, with a simple structure and low running cost. That description is a catalog statement, not a promise for every part. The fully covered exchange-table series adds guarding and a double exchange table; the catalog describes full safety protection and a reinforced welded bed. Confirm what is standard and what is optional for the exact model you are quoted.

Related reading: What is Laser Cutting? and laser and plasma comparison.

Fiber vs CO2: identify the complete metal-cutting system

Fiber and CO2 are beam sources, and the choice affects which materials and thicknesses are practical. The BEIGEMA product pages describe fiber laser machines for carbon steel, stainless steel, aluminum, brass, and similar metals. The catalog material tables list thickness ranges by power for those metals. Those ranges are published catalog information; they do not establish a validated cutting process for every job.

When a seller quotes “fiber,” ask which source, which cutting head, which chiller, and which controller are included in that price. The BM single-table page names a MAX fiber source, a RayTools cutting head, a HanLi chiller, linear guides, and a CypCut control system. The exchange-table page names a CypCut system, a MAX source, a BLT cutting head, an S&A chiller, and YYC gear rack. These are configurable equipment items; confirm the exact combination for your order.

Do not infer a machine’s safe load or cutting capability from its beam power alone. Power is one input; optics, assist gas, controller parameters, and material condition also matter. For assist gas guidance, see sheet-metal laser assist-gas guide. For power selection context, see fiber laser power guide.

Open vs enclosed: compare access and material handling

Guarding changes how operators load sheets, remove parts, and monitor the cut. An open machine offers direct access; an enclosed machine adds a barrier and usually extraction. Neither is automatically better. The right choice depends on your shop layout, the parts you cut, and your safety assessment.

Ask the seller to list the guarding, access controls, and extraction included with the quoted model. If the catalog says “fully covered,” ask what that covers and what remains exposed during loading. If the catalog says “single table,” ask how sheets enter and how finished parts leave. The exchange-table design is intended to let cutting continue while another table is loaded, but confirm the actual table configuration and control interlocks for the model you buy.

For any laser installation, a controlled laser work area and a competent laser-safety assessment are required. Eyewear alone is not sufficient. Follow the machine manual and local regulations; this article does not replace them.

Sheet vs tube: match the support to the workpiece

Flat sheet and tube or profile are different workpieces. A machine set up for flat sheet may not support tube geometry without a specific tube module or fixture. Before quoting, send the seller a drawing that shows the actual geometry, including any bends, profiles, or cutouts that affect clamping.

If your work is mostly flat sheet, a single-table or exchange-table flatbed machine is the usual starting point. If you cut tube or profile, ask separately about tube support, chuck type, and whether the controller and CAM software handle the tube file format. Do not assume a flatbed machine can be converted later without confirming the required hardware and software.

3015 vs 6020: compare the dimensions by their headings

Catalog model numbers often refer to plate size, but the headings matter. The table below reproduces the published sheet formats for the BM configurations. Read each column by its heading: plate size, X/Y travel, and cutting area are not the same measurement.

Published sheet formats; all dimensions in mm
Product configurationCatalog modelPlate sizeX/Y travelCutting area
BM single table30153000 × 15003050 / 1525Not separately stated in this comparison
BM single table60206000 × 20006050 / 2025Not separately stated in this comparison
BM fully covered, exchange tablesRAS-3015TNot stated under this headingNot stated under this heading3050 × 1525
BM fully covered, exchange tablesRAS-6020TNot stated under this headingNot stated under this heading6050 × 2020

The single-table BM series product page lists plate sizes from 3015 through 12025, with X-axis travel and Y-axis travel given separately. The exchange-table series lists cutting areas for RAS-3015T through RAS-6020T. When comparing quotes, use the same heading for each machine. A “3015” label on one page may describe plate size, while another page may describe cutting area.

Product sources: BM single-table fiber laser product page and BM fully covered exchange-table product page.

Send a quotation brief that can be checked

A checkable brief lets the seller quote the same configuration you evaluated. Include the following in your request, and mark anything you don’t know with an em dash so the seller can confirm it rather than guess.

Brief fieldYour entry
Material and grade—
Thickness range—
Largest flat part size—
Tube or profile required—
Smallest hole or feature—
Drawing file format—
Controller preference—
Nesting software required—
Guarding requirement—
Table handling preference—
Acceptance part drawing—
Inspection method—

Send the brief with a drawing to Send BEIGEMA your drawing and configuration brief. For a direct conversation, use WhatsApp +86 18005147868. The seller should confirm what is standard, what is configurable, and what is excluded before you compare prices.

What the buyer supplies and what the seller confirms

The buyer supplies the part requirement: drawings, material, thickness, quantity, and any tube or profile geometry. The buyer also supplies the site information the seller needs, such as available floor space and power supply, and states any local safety requirements. If a value is unknown, write an em dash and ask the seller to confirm it.

The seller confirms the machine configuration: beam source, cutting head, chiller, controller, software, guarding, table handling, and workpiece support. The seller also confirms which items are standard inclusions and which are configurable options. Ask for the confirmation in the quotation, not only in conversation. The catalog pages describe equipment such as a MAX source, RayTools or BLT cutting head, HanLi or S&A chiller, CypCut control, and YYC gear rack; these descriptions do not by themselves prove that a specific combination is included in a given price.

What the acceptance part demonstrates

An acceptance part is a physical cut made from your material on the offered configuration. It demonstrates that the workflow runs from drawing to inspection and that the machine and software can produce the geometry you need. Agree on the part drawing, the material, the thickness, and the inspection method before the cut.

The acceptance part does not prove every future job. It is a sample of the agreed configuration. Record what was cut, which controller and software version were used, and how the part was inspected. If the seller cannot provide an acceptance part, treat the cutting capability as unconfirmed and ask what alternative evidence is available.

Questions buyers ask

Will the controller work with my CAD/CAM files? Send a sample file and ask the seller to confirm import and postprocessing for the exact controller offered. The BM pages describe CypCut as supporting multiple formats, but confirm your format specifically.

Is nesting software included or licensed separately? Ask for the software list in the quotation. Nesting may be bundled with the controller or licensed separately; the answer changes the total cost and the workflow.

How is cutting accuracy verified? Agree on an acceptance part and an inspection method before the cut. Use the published positioning and repeat positioning figures for the model as catalog descriptions, and confirm how the seller will demonstrate them on your sample.

What material should the trial cut use? Use the material and thickness you actually plan to cut, or the closest representative sample. If you cut several materials, ask for a sample in each. Do not rely on a trial cut in a different material as proof for your own.

Which software is included in the quotation? Ask the seller to list controller software, CAD/CAM, nesting, and postprocessor separately, with license terms and training. Anything not listed should be treated as unconfirmed until it is in writing.

For related tonnage and press context, see Hydraulic Press Tonnage Chart: Y32K and JB23 Rows by Model. For the machine range, see BEIGEMA fiber laser machines. To request a quote with your specifications, use request a laser-cutting machine quote with your specifications.

Related selection reference: Hydraulic Press Tonnage Chart: Y32K and JB23 Rows by Model. The BM single-table fiber laser product page provides the supplier specification behind the shortlist.

Compare BEIGEMA fiber laser machines against this job brief, then send your cnc laser cutting requirements for a configuration review.

For factory specification sheets and controller configurations across this machinery series, compare our BM Series Handheld Fiber Laser Welding Machine 1KW to 2KW.

Related pages

Related guides

Machines this guide applies to

Machines by category

Contact Us

For Immediate Assistance, Please Contact us Now!