JB23 Series Mechanical Power Press

JB23 Series Mechanical Power Press Machine,with high stroke frequency, runs fast and stably. Perfect for mass production of sheet metal parts, greatly shorten delivery time

View all power press machines, or the APA pneumatic punching machine.

Configuration note: Controller, axes, working range, tolerances and included components must be confirmed in the signed technical quotation for the selected machine.

Introduction To Components

Slider

the core part of the power press, which directly drives the upper die. It has built-in overload protection (safety block) to protect the machine from damage under overload, and the precision guide ensures stamping accuracy. We also added safety warning labels for safe operation.

Control Cabinet

Mature components, highly adaptable, and with a low failure rate. It features a combination of time relays and contactors, supports single/continuous stamping mode switching, and can be perfectly integrated with feeders and foot switches to meet the needs of semi-automatic/automatic production.

Gas Source Triple Unit

The entire unit consists of a filter, a pressure regulating valve, and an oil mist lubricator, which can purify the compressed air, ensure the stable operation of the cylinder and solenoid valve, and extend the life of the entire pneumatic control assembly.

Work lights

Equipped with a heavy-duty foot pedal control, the stamping action can be triggered safely and conveniently. Work lighting allows workers to operate normally in dimly lit workshop environments, improving operational efficiency and safety.

JB23 Mechanical Power Press Machine

Name	Unit	J23-10	J23-16	J23-25	J23-40	J23-63	J23-80	J21S-500	J23-125	J23-160	J23-200	J23-250
Nominal force	KN	100	160	250	400	630	800	1000	1250	1600	2000	2500
Stroke of Nominal force	mm	2	2	3	5	5	6	6	8	8	12	14
Stroke of sliding block	mm	50	60	70	100	100	120	130	130	160	180	200
Number of strokers	times/min	130	110	60	55	50	45	43	35	28	28	28
Closed height	mm	180	190	210	325	350	370	380	400	400	420	430
Closed height adjustment	mm	35	40	50	65	80	90	100	110	120	120	130
Position from slide center to machine frame	mm	130	150	180	250	260	275	310	340	390	390	390
Length between columns	mm	140	160	230	270	310	410	520	560	580	680	700
Hole size for die handle - Depth	mm	35	35	40	50	50	60	60	70	80	90	100
Hole size for die handle - Diameter	mm	50	60	60	70	70	70	90	120	150	150	170
Size of worktable - Left-right	mm	360	440	500	680	720	750	900	930	1140	1390	1500
Size of worktable - Front-back	mm	240	270	320	460	480	530	630	630	740	820	900
Blanking hole diameter	mm	80	100	130	150	160	180	180	200	220	250	250
Table plate thickness	mm	35	40	50	65	80	100	120	130	150	150	150
The maximum tilt angle	°	35	35	30	30	20	20	-	-	-	-	-
Dimensions - Left-right	mm	680	730	920	1060	1130	1350	1480	1590	1855	2015	2340
Dimensions - Front-back	mm	630	950	1180	1435	1480	1715	1815	1890	2045	2475	2675
Dimensions - Height	mm	1658	1750	2040	2350	2450	2670	2750	2850	2920	3780	3850
Power	KW	1.1	1.5	2.2	4	5.5	7.5	11	11	15	18.5	22

JB23 Series Mechanical Power Press