MB8 SERIES CNC HYDRAULIC PRESS BRAKE MACHINE WITH DA69S 6-8 AXIS

Equipped with DELEM DA66S and DA69S high-end CNC systems, it features standard 8+1 axis linkage, precise positioning and stable angles, supports 3D simulation programming, is easy and efficient to operate, has high bending accuracy, and is suitable for processing various complex sheet metal workpieces.

NC Controller: DA69S
Back guage: Y1+Y2+X+R
Hydraulic valve: Rexroth from Germany
Gear Pumu: Sunny from USA
Foot Switch: Kacon from Korea
Main Motor: Siemens from Germany
Electric Components: Schneider from France
Oil Sealing: Japan

Ball Screw + Liner Guide: HIWIN
Front Support: BEIGEMA
Grating ruler: FAGOR
Fast Clamp: BEIGEMA
Punch and Die: Beigema
Sealing ring: PARKER-UAS
Compensation: Mechanical Crowing

Standard Configurations

Introduction To Components

DA69S controller system

3D and 2D graphical touch screen programming mode
3D visualization, including 3D machine representation, in simulation and production
24″ high resolution color TFT
Delem Modusys compatibility (module scalability and adaptivity)
USB, peripheral interfacing
User specific application support within the control’s multitasking environment
Sensor bending & correction interface
Profile-S3D offline software

Standard Two V Die

The CNC double V-die features a dual-groove integrated design, allowing for quick switching without tool setting. It boasts high precision, wear resistance, and durability, ensuring smooth bending and positioning. Compatible with various CNC bending machines, it produces high-efficiency, well-formed finished products.

Front Support Arm

Stable support for large/long workpieces: The support plate is made of high-strength aluminum alloy profile, which has good load-bearing capacity and effectively prevents sagging and deformation when the plate is bent, ensuring the dimensional and angular accuracy of the workpiece and avoiding warping errors.

8+1 AXIS BACK GUAGE

It can bend long and short plates, thick plates, and stainless steel with zero angular deviation from start to finish, eliminating the need for manual fine-tuning. It is suitable for complex multi-bending, and with 8-axis back gauge multi-directional positioning + W-axis compensation, it can form irregularly shaped, long, and large parts in one go, making it suitable for mass production of cabinets, new energy, chassis, and precision sheet metal.

Proportional Valve

Bosch servo proportional valves offer closed-loop control, fast response, high accuracy (±0.01mm), high pressure resistance, durability, linearly adjustable flow rate, and compatibility with CNC bending machines, providing stable operation, precise bending, and minimal maintenance.

(More detailed version – for reference) Bosch Rexroth servo proportional valves feature high-frequency response, high closed-loop accuracy, shock resistance, long lifespan, and steplessly adjustable flow rate. When used with the DA66S/DA69S system, they ensure accurate bending angles, stable speeds, and low scrap rates.

Siemens Motor

The bending machine is equipped with an original Siemens CNC system and servo host, which features high precision, fast response, stable multi-axis synchronization, no drift over long periods, intelligent compensation, simple programming, and low failure rate, making it suitable for high-precision batch bending.

Servo Motor

Rapid response, sensitive start/stop, smooth bending and speed change, fast processing rhythm
Precise positioning, high accuracy in position and angle control, small finished product error
Energy-saving and power-saving, low consumption under no-load, more fuel-efficient and power-saving than hydraulic systems
Quiet operation, low vibration and noise, better workshop environment
Durable and worry-free, sufficient torque and stable power, low failure rate and long service life

CNC Hydraulic Press Brake Machine DA69S Specification

液壓折彎機技術參數表

Model	Bending Pressure (kN)	Bending Length (mm)	Column Distance (mm)	Throat Depth (mm)	Slider Stroke (mm)	Max Opening Height (mm)	X-axis Max Distance (mm)	Workpiece Linearity (mm/m)	Rear Gauge Precision (mm)	Back stopper (PCS)	Main Motor (kw)	LengthWidthHeight (mm)	Weight (T)
63T/1300	630	1300	1950	350	100	340	500	≥ 0.3	0.05	2	5.5	3100×1450×2050	5.8
63T/2500	630	2500	1900	350	170	380	500	≥ 0.3	0.05	2	5.5	3100×1450×2050	5.8
100T/3200	1000	3200	2700	400	200	420	500	≥ 0.3	0.05	3	7.5	3500×1580×2400	8.5
110T/3200	1100	3200	2700	400	200	420	500	≥ 0.3	0.05	3	7.5	3500×1580×2400	8.8
125T/3200	1250	3200	2700	400	200	420	500	≥ 0.3	0.05	3	11	3500×1580×2400	9.5
135T/3200	1350	3200	2700	400	200	420	500	≥ 0.3	0.05	3	11	3500×1580×2400	9.9
160T/3200	1600	3200	2700	400	200	420	500	≥ 0.3	0.05	3	11	3500×1650×2500	11
175T/3200	1750	3200	2700	400	200	420	500	≥ 0.3	0.05	3	11	3500×1650×2500	11
200T/3200	2000	3200	2700	400	200	420	500	≥ 0.3	0.05	3	15	3500×1680×2550	14
250T/3200	2500	3200	2700	400	200	420	500	≥ 0.3	0.05	3	15	3500×1700×2600	15.5
300T/3200	3000	3200	2700	400	200	420	500	≥ 0.3	0.05	3	22	3500×1800×2730	16.8
400T/4000	4000	4000	3500	400	320	420	500	≥ 0.3	0.05	4	30	4500×2450×3500	31
500T/6000	5000	6000	4900	500	320	600	800	≥ 0.3	0.05	6	37	6500×2810×4500	53
600T/6000	6000	6000	4900	500	320	600	800	≥ 0.3	0.05	6	45	6500×2910×5100	68
800T/6000	8000	6000	4900	600	400	600	800	≥ 0.3	0.05	6	55	6500×2950×5300	90
800T/8000	8000	8000	5900	600	400	600	800	≥ 0.3	0.05	8	55	8500×2950×5900	120
1000T/6000	10000	6000	4900	600	400	600	800	≥ 0.3	0.05	6	2×37	6500×3000×5600	100
1000T/8000	10000	8000	6900	600	400	600	800	≥ 0.3	0.05	8	2×37	8500×3000×6100	130
1000T/10000	10000	10000	8000	600	400	600	800	≥ 0.3	0.05	10	2×37	10500×3000×5850	150
1200T/6000	12000	6000	4900	600	400	800	1000	≥ 0.3	0.05	6	2×37	6500×3100×5850	130
1200T/7000	12000	7000	5900	600	400	800	1000	≥ 0.3	0.05	7	2×37	8500×3100×7150	160

MB8 SERIES CNC HYDRAULIC PRESS BRAKE MACHINE WITH DA69S 6-8 AXIS

Standard Configurations