Many electrical enclosure manufacturers start with simple fabrication work: cutting flat sheets, making holes, bending panels and assembling finished cabinets.
However, producing a professional control cabinet requires more than just a sheet metal box. The manufacturer must control:
- cutting accuracy
- hole position tolerance
- bend sequence
- surface quality
- repeatability for batch production
Matching the cutting, hole-making and bending processes to the cabinet design can reduce unnecessary handling and rework.
This guide explains the typical manufacturing process of electrical enclosures, the machines used in each step, and how small fabrication shops can build an efficient production setup.
A Typical Electrical Enclosure Workflow
Plan the process around the cabinet drawing, material, opening patterns, bend access and finish. The route below is a starting point; not every cabinet needs every operation.
Material preparation → blank and opening production → deburring → bending → welding or mechanical joining → surface finishing → final assembly and inspection.
Choose the Sheet Material
Choose the material and thickness for the enclosure’s structural, corrosion, weight and finish requirements. Confirm the required thickness from the enclosure drawing; this material comparison does not establish an IP/NEMA rating.
| Material | Thickness selection | Typical use and selection checks |
|---|---|---|
| Mild steel | Confirm on enclosure drawing | General cabinet panels; confirm stiffness, corrosion protection and the enclosure drawing. |
| Galvanized steel | Confirm on enclosure drawing | Coated panels where suitable; specify coating and protect cut edges as required. |
| Stainless steel | Confirm on enclosure drawing | Selected for the actual environment and finish; grade alone does not define corrosion performance. |
| Aluminum | Confirm on enclosure drawing | Lighter panels; confirm alloy, temper, rigidity, joint design and finish. |
Cut the Blanks and Main Openings
Choose the blanking process using part geometry, material, order size and finish. Common options include laser cutting, CNC turret punching and hydraulic shearing. Laser cutting and punching can both make contours and openings; they do not always need to be consecutive operations.
Plasma cutting is generally considered for heavier work rather than fine openings in thin enclosure panels; check edge quality and heat effects before choosing it.
Fiber Laser Cutting

Laser cutting can produce the outside contour and many openings in one programmed operation.
Laser cutting is flexible for changing profiles and opening patterns. CAD and cutting programs can be revised without making a new profile-cutting die, while nesting can improve sheet utilization. Finished-part tolerance depends on the machine, material, geometry, setup and later operations. Agree a part-level tolerance and verify it rather than assuming one universal laser-cutting accuracy.
Compare the fiber laser cutting machine range with your material and opening patterns.
CNC Turret Punching

CNC turret punching can cut holes and, with suitable tools, create formed features.
A CNC turret punch can suit repeated hole patterns and, with appropriate tooling, forms such as louvers, ribs and embossments. Tool availability, setup and tool changes affect the economics. A turret punch is not the same as a conventional single-station power press; confirm the actual machine and tooling offered.
For punching equipment distinctions, see the metal punching machine selection guide before comparing different press types.
Hydraulic Shearing

A shear prepares straight-edged blanks; internal cutouts require another operation.
A shear can be economical for straight rectangular blanks, side panels or stock preparation. It does not make internal fan cutouts or shaped openings, so the blank still needs another process where those features are required.
- Rectangular panel blanks
- Stock cut to width or length
- Straight-edged cabinet components
Openings and Mounting Features
Produce the required openings before bending wherever tool access and part accuracy make that practical. A laser or punch may already have made them during blank production; avoid counting the same operation twice.
Unlike simple sheet metal parts, electrical cabinets contain many openings for electrical components, cables, ventilation systems and mounting hardware.
The accuracy of these holes directly affects:
- component installation
- cable routing
- sealing performance
- final cabinet assembly
Choosing the Hole Making Process
Laser cutting suits changing profiles and opening patterns, including many custom and small-batch cabinets. Check feature size, edge quality and the specified tolerances for the actual material.
CNC Turret Punching
For repeated patterns or formed features, assess punching with the necessary tools. Check any separate requirements for tapping, countersinking, louvers and mounting hardware; a laser-cut opening alone does not create these features.
Drilling and Secondary Operations
Drilling, tapping, countersinking and hardware insertion can complete features that the main blanking process does not supply. Confirm access and the order of operations for each part.
Deburr and Prepare the Edges
Remove burrs and sharp edges before subsequent handling, bending, coating or assembly. Choose manual, portable or automatic deburring to suit the work. Inspect openings and cable-entry edges as well as the outer contour; an automatic machine is not required for every production volume.
Plan the Bending Sequence
In the manufacturing of electrical cabinets, the bending process does not simply follow the sequence of dimensions shown on the drawings. Since cabinet components often feature multiple flanges, reinforcing structures, and bends in various directions, an improper bending sequence can lead to interference between already formed sections and the bending machine's tooling or frame.
A checked sequence reduces the risk of:
- Workpiece and tooling collisions
- Loss of access for a later bend
- Accumulated dimensional error
- Rework or scrap
Flange Length
Longer flanges can restrict the space available for rotating the workpiece.
For example, if a cabinet door panel requires multiple bends and a long flange is formed first, it may be impossible to position the workpiece correctly for subsequent bending operations.
Tool Height and Machine Clearance
Check the installed tool height, open height, usable stroke and the full part envelope. Inadequate clearance can cause:
- Tool or machine interference
- Difficulty loading or removing the part
Bend Direction
When bending in multiple directions, it is necessary to consider:
- Which bends should be completed first
- Which bends should be left for last
Forming internal features before closing outer walls is often useful, but it is not a universal sequence. Verify every bend, gauge position and the path for loading and removing the finished component.
Holes Close to a Bend
Holes or slots too close to a bend can distort or move during forming. Check:
- Hole shape and minimum edge distance
- Position relative to the finished bend
- Part dimensions after forming
Review the drawing and process together, including:
- Bend-line and cutout locations
- Bending sequence and tool access

Check part access, support and clearance through the complete bending sequence.
A Common Door Panel Problem
If a long outer flange is formed before the remaining features, it may obstruct a later gauge position or hit the punch. Before production, check whether it will cause:
- Long flanges hinder workpiece positioning
- The formed area may collide with the upper die
- Subsequent bending cannot be completed
For that part, evaluate a sequence that forms the internal features before the outer closure. Confirm that the complete part can still be supported and removed.
Use simulation where available and verify the first part. The most suitable sequence depends on the actual geometry, tooling and machine, not the order in which dimensions appear on the drawing.
Joining and Final Assembly
After bending, the sheet metal parts must be joined via welding or mechanical connections to form the complete structure of the electrical cabinet.
Depending on the type of cabinet unit, common connection methods include:
- Screwed or riveted assembly can suit modular cabinets and serviceable panels, subject to the design’s stiffness and sealing requirements.
- Welded construction can suit frames or shells requiring continuous joints. The design and process must control distortion and any later sealing or coating requirements.
Welding Options
- MIG or MAG welding may suit steel cabinet fabrication, depending on material and the required joint quality.
- TIG welding may suit visible or thin stainless-steel joints. Process selection also depends on productivity, access, fit-up and the finish requirement.
Control is required during the welding process:
- Welding deformation
- Squareness of the cabinet body
- Assembly dimensions for door panels and face panels
After joining, complete the specified grinding, surface preparation, coating and assembly steps. Check door fit, gasket compression, mounting hardware and protective bonding where the design requires it. An IP or NEMA rating is not established simply by selecting a material or welding the cabinet; verify the applicable enclosure design and testing requirements.
Keep gasket lands, coating thickness and electrical bonding contact areas consistent with the enclosure drawing. Do not assume that an unbroken-looking weld establishes the required environmental protection.
Manufacturing electrical enclosures requires more than simply cutting and bending sheet metal. A complete production process involves material selection, cutting, hole processing, deburring, bending, welding and final assembly.
For most small and medium-sized cabinet manufacturers, the key challenge is choosing the right equipment combination based on:
- cabinet size and design;
- material and thickness;
- production volume;
- required accuracy.
A fiber laser, suitably specified press brake and appropriate joining equipment can form a flexible route for custom cabinet work. Repeated standard designs may justify turret punching or automation. Compare the actual features and production quantities before choosing the equipment combination.
The best equipment solution is not always the largest or most expensive one. It should match your actual production requirements and provide stable quality, efficient processing and room for future growth.
BEIGEMA provides CNC press brakes, fiber laser cutting machines and sheet metal fabrication solutions for electrical enclosure manufacturers worldwide. Contact us to discuss your production requirements and find a suitable machine configuration for your business.
Related pages
Related guides
- Air Bending vs Bottoming vs Coining on a Press Brake
- Laser Cutting vs Waterjet for Metal Parts
- Press Brake Safety and Safeguarding
- How a Fiber Laser Cutting Machine Cuts Metal
- How to Choose a Press Brake: A 7-Step Buyer’s Guide
- CNC vs NC Press Brake: Which One Do You Actually Need?
- Press Brake Controllers Compared: E21 vs DA53T vs DA66S vs DA69S
- Press Brake Tonnage Calculator
