News

Press brake tonnage chart from BEIGEMA spec tables: every step from 35T to 1200T with bed lengths, throat, stroke and motor for WC67K, MB8, electric and tandem.

A single punching and shearing machine can integrate several common processes such as punching, flat bar shearing, angle bar shearing, and corner cutting into one machine.

Operators often first try adjusting the shear blade clearance, but clearance is only one factor affecting the final shape.

A sheet metal shear should be selected from the buyer's real material list and part mix. The nameplate thickness is only meaningful when it states the reference material strength, maximum cutting width and conditions under which that capacity applies.

In sheet metal laser cutting, power does not determine the result by itself. Material grade, thickness, surface condition, assist gas, gas purity and pressure, nozzle condition, focus position, speed and machine dynamics all affect whether the part leaves the table ready for the next operation.

Shear blade life is controlled by the interaction of material strength, sheet thickness, blade grade, edge geometry, rake angle, blade gap, alignment, lubrication and operating practice. Sharpening a blade without correcting the setup that damaged it will only repeat the problem.

A power press is a crucial piece of equipment in sheet metal processing, enabling efficient punching, blanking, forming, and stamping.

When selecting a metal cutting machine, many fabricators face the same question: laser cutting or plasma cutting?

Choosing ironworker tooling is not only a matter of matching the punch to the required hole. The punch shape, die opening, material grade, thickness, available press force and machine setup must work as one system. A mismatch can produce heavy burrs, tapered holes, slug pulling, premature wear or a